
November 1, 2026
Written By: David DiNatale, Esq
Building a home in Jupiter, Florida typically costs somewhere between $280 and $1,025 or more per square foot for construction alone, and the figure depends mostly on finish level, lot conditions and how close to the water you build. One October 2026 estimator puts a 2,400-square-foot home at roughly $670,000 to over $2.46 million, before land and soft costs. Luxury builds sit well above that range. Below, we break the numbers into tiers, show what estimates leave out, and explain how builders and investors finance the gap.
The honest answer is a range, because published estimates measure different things. Here is how the main figures compare.
| Source and scope | Per square foot | Notes |
|---|---|---|
| Jupiter estimator, October 2026 | $280 to $1,025+ | Mid-range single-family, excludes land and soft costs |
| HomeGuide, Florida builder-grade | $180 to $280 | Statewide, excludes land and site preparation |
| HomeGuide, Florida custom | $280 to $400 | Statewide, excludes land and site preparation |
| HomeBlue, Jupiter | $120 to $230 | Older estimate, excludes land and sitework |
The spread is wide for a reason. The older Jupiter estimate from 2024 sits at the bottom of the table, while the 2026 figure runs more than four times higher at the top. Construction pricing has moved, and each publisher uses its own assumptions about finishes, structure and what counts as “standard.” If you are budgeting a real project, the newest figures and a local builder’s bid matter more than any single published average.
The same October 2026 estimator gives a total of approximately $670,000 to over $2.46 million for a 2,400-square-foot home, excluding land and soft costs. For context, HomeGuide reports a Florida average of $350,000 to $600,000 with a $480,000 midpoint, and a stated overall statewide range of $150,000 to $2,000,000. Those statewide numbers blend inland and rural markets with coastal ones. Jupiter is a coastal, high-demand town, so the statewide midpoint is a poor guide to what you will actually pay here.
Much of the new construction in Jupiter’s gated and waterfront communities is custom, and it prices differently from production homes. Reported figures vary by builder and by year:
To see what that means in dollars, multiply. At the $550 to $800 base luxury range, a 2,400-square-foot home works out to about $1.32 million to $1.92 million in construction cost alone. At the ultra-luxury floor of $900 per square foot, the same footprint is $2.16 million. Luxury homes in this market are rarely 2,400 square feet, so scale the math to your plans.
A per-foot figure is only the vertical construction number. Before you commit to a budget, add the items that sit outside it.
Most estimates exclude the lot. One local builder reports that Jupiter land prices range from $300,000 to over $2.5 million, depending on location, lot size and proximity to amenities. On a mid-range build, land can account for a large share of total project cost.
The 2026 luxury forecast cited above reports design fees of 10% to 15% of build cost, and $150,000 to $500,000+ for site preparation, landscaping and outdoor features. On a $1.5 million build, a 10% to 15% design fee alone is $150,000 to $225,000. HomeBlue and Sabal both state outright that sitework, pool, dock and similar items are outside their numbers.
Impact fees are a county-level cost that catches first-time builders off guard. According to the Town of Tequesta, as of January 1, 2026, Palm Beach County impact fee assessments are calculated on the fee schedule in effect when the permit is issued, not when the application is filed. In practice, a delay between application and permit can change what you owe, so confirm the current schedule with the local building department before you finalize numbers.
Two houses of the same size can differ by hundreds of thousands of dollars. The usual drivers:
Before you buy a lot, a structured site feasibility assessment is a useful way to test zoning, constraints and costs against the budget, so a surprise does not surface after closing on the land.
For a new home in Jupiter, $300,000 is unlikely to cover a full project once land is included, because the lot alone can start at $300,000 according to the local land range above. If you already own the land, the picture changes. A statewide benchmark from Today’s Homeowner estimates a 2,100-square-foot Florida home at under $300,000, excluding land and leveling. That is a statewide method using a fixed contractor surcharge, not a Jupiter quote. At the Jupiter estimator’s lower bound of $280 per square foot, $300,000 buys roughly 1,070 square feet of construction before soft costs and site work. Treat $300,000 as a budget for a small, simple home on a lot you already own, with a cushion for the items above.
No source we reviewed publishes a Jupiter-specific figure for a 1,200-square-foot home, so here is the arithmetic from the published per-foot range. Multiplying 1,200 square feet by the October 2026 estimator’s $280 to $1,025 per square foot gives about $336,000 to $1.23 million for construction only. Small homes often cost more per square foot than larger ones because kitchens, bathrooms and mechanical systems do not shrink in proportion, so expect the lower end to be optimistic. Add land, site work, permits and design before you treat any of these as an all-in number.
Cost is only half of the question. The other half is how you fund it. Most builders and investors do not pay for a ground-up project out of pocket. They use a construction loan that releases money in stages as work is completed, which keeps your capital free for land, soft costs and contingencies.
Three practical points for a Jupiter project:
For a broader view of the process, our ground-up construction loan article explains how draws and inspections typically work.
Most of the budgets we see in Jupiter go wrong in the same place: the estimate covers the house but not the project. A per-foot number looks precise, then land, site work, design fees, impact fees and landscaping arrive after the loan request is already sized.
We built our lending around that reality. Capital Funding is a direct private lender backed by a family office, and we are designed to close hard money loans in days, not months. That matters on a waterfront or gated-community lot where the seller will not wait on a bank committee.
We also finance projects other lenders will not, including ultra-luxury single-family homes over $10 million. When a build sits at the top of the cost ranges above, a tailored structure is often what keeps it moving. Our Ground Up Construction Program is priced at 8.99% to 10.99%, with origination fees of 1.50% to 3.00%, and we have closed over $1 billion in loans.
Our advice to builders and developers: get your full project cost on paper first, then bring it to us. We can structure around it.
Daly Kay DiNatale
If you are planning a ground-up project in Jupiter, West Palm Beach or elsewhere in South Florida, our Ground Up Construction Program is built for it. We lend directly, we are backed by a family office, and we aim to give builders and developers a fast, clear answer.
Published program rates run from 8.99% to 10.99%, and origination fees run from 1.50% to 3.00%. Bring your plans, your budget and your timeline, and we will tell you what we can fund. You can also start from our Florida hard money lender page.
It depends on the market and the tier. Fox Luxury Builder’s October 2026 statewide figures run from about $300 to $500 per square foot for entry-level luxury up to $850 to $950-plus for ultra-luxury, before land. In Jupiter and nearby South Florida communities, builders report $550 to $800 per square foot for base luxury and $900 to $1,800+ for ultra-luxury. Always ask for a written bid for your specific plans.
Much of its new construction is. The local builder estimates above describe luxury custom homes in communities such as The Bear’s Club and Frenchman’s Creek, and oceanfront building on neighboring Jupiter Island is priced higher still. That said, Jupiter also has a range of mid-priced neighborhoods, which is why published cost ranges are so wide.
Generally no. The Jupiter estimator, HomeGuide, HomeBlue and the luxury builders cited here all exclude land, and several also exclude site work, design and outdoor features. Add those before you compare any estimate to a lender’s loan amount.
Yes. A construction loan funds the project in stages rather than as one lump sum. Our Ground Up Construction Program is designed for builders and developers who need speed and flexibility, and you can review the details on our program page or talk to our team about your project.
Each publisher defines scope differently. Some count only base construction, some include a contractor markup, and some are dated. The 2024 Jupiter figure of $120 to $230 per square foot and the 2026 figure of $280 to $1,025+ are good examples. Use the newest estimates for orientation, then rely on bids from local builders.